# Basic Config esphome: name: sonoff_s31 platform: ESP8266 board: esp01_1m wifi: ssid: !secret wifi_ssid password: !secret wifi_password logger: baud_rate: 0 # (UART logging interferes with cse7766) # Remove this line if you're not using Home Assistsant or your switch will restart every now and again api: ota: # Device Specific Config uart: rx_pin: RX baud_rate: 4800 binary_sensor: - platform: gpio pin: number: GPIO0 mode: INPUT_PULLUP inverted: True name: "Sonoff S31 Button" on_press: - switch.toggle: relay - platform: status name: "Sonoff S31 Status" sensor: - platform: wifi_signal name: "Sonoff S31 WiFi Signal" update_interval: 60s - platform: cse7766 current: name: "Sonoff S31 Current" accuracy_decimals: 1 voltage: name: "Sonoff S31 Voltage" accuracy_decimals: 1 power: name: "Sonoff S31 Power" accuracy_decimals: 1 id: my_power - platform: total_daily_energy name: "Sonoff S31 Daily Energy" power_id: my_power switch: - platform: gpio name: "Sonoff S31 Relay" pin: GPIO12 id: relay restore_mode: ALWAYS_ON time: - platform: sntp id: my_time status_led: pin: GPIO13